New driveways, replacements and crossovers — plain, coloured or exposed aggregate, on a compacted base with steel mesh and proper falls. Local crew, fixed written quotes, 5-star Google rating.
No obligation · On-site measure within 48 hours · Fixed written price
★★★★★ 5.0 on Google · Quality Australian materials
Mickleham is our home base, so we're often on site the same week you call. Estates like Annadale and Merrifield are full of sloping blocks and brand-new homes still waiting on driveways.
Most new homes in Mickleham hand over with a dirt or crushed-rock driveway — and often an estate deadline to finish the front yard. We design the driveway, path and crossover as one job, pour on a compacted base with steel mesh, and lodge the crossover permit with Hume City Council.
We dig out to the right depth, lay and compact crushed rock, set formwork to falls so water runs to the street or a drain, place steel mesh on bar chairs, and pour quality Australian premix. Control joints are saw-cut the next day so any shrinkage cracking happens where we choose — not across the middle.
We bring samples to every Mickleham measure so you can see them against your house.
Broom or steel-trowel finish. The most affordable option — $85–$130 per m².
Oxide colour through the whole mix, so chips don't show grey — $95–$140 per m².
Stone washed back to the surface. Grippy, hides tyre marks and dirt — $110–$160 per m².
We break out and cart away the old slab ($25–$45 per m² extra), fix the base and pour new.
The section across the nature strip, built to council spec with the permit handled — usually $2,500–$5,500 per crossover.
Thicker slabs and more steel for caravans, trucks, boats and commercial driveways.
| Job | Indicative price (inc. GST) |
|---|---|
| Plain concrete | $85–$130 per m² |
| Coloured concrete | $95–$140 per m² |
| Exposed aggregate | $110–$160 per m² |
| Remove old concrete | $25–$45 per m² extra |
| Council crossover | $2,500–$5,500 each |
Indicative 2026 Melbourne ranges for standard access. Your price depends on size, access, excavation, slope and finish — you get a fixed written quote after a free on-site measure.
Free on-site visit. We check levels, access, soil and drainage, then give you a fixed written price.
Excavation, compacted crushed-rock base, formwork, steel reo and vapour barrier — the bit you never see.
Australian premix pumped or barrowed in, screeded to falls, then finished — broom, trowel, coloured or exposed.
Control joints saw-cut, surface sealed, site cleaned up. You get care instructions and a slab that lasts.
Indicatively $85–$130 per m² for a typical Mickleham job, depending on size, access, slope and finish. You'll get a fixed written price after a free on-site measure.
We can usually measure in Mickleham within 48 hours. Most driveways jobs are on site within one to three weeks of saying yes, weather permitting.
Mickleham is in Hume City Council. A new or widened crossover in Mickleham needs a vehicle crossing permit from Hume City Council, and usually an asset protection permit too. We lodge both and book council's inspection.
For cars, a residential driveway is usually 100 mm thick on a compacted crushed-rock base with steel mesh. For caravans, trucks or soft ground we go to 125–150 mm with heavier reinforcement.
Most driveways take two to four days on site: excavation and base, formwork and steel, then the pour. You can walk on it after 24–48 hours and drive a car on it after about 7 days.
Tell us a little about the job and we'll book a free on-site measure — usually within 48 hours.
No obligation · On-site measure within 48 hours · Fixed written price
★★★★★ 5.0 on Google · Quality Australian materials