Concrete sleeper, core-filled block, poured concrete, sandstone, timber and gabion walls — with drainage and backfill done properly. Local crew, fixed written quotes, 5-star Google rating.
No obligation · On-site measure within 48 hours · Fixed written price
★★★★★ 5.0 on Google · Quality Australian materials
Beveridge is one of the fastest-growing pockets of Mitchell Shire, with estates like Mandalay and plenty of larger, sloping blocks.
Plenty of Beveridge blocks were cut and filled when the estate was built, leaving a step along the boundary that needs holding back. Concrete sleeper walls with galvanised steel posts are the most common fix — tidy, fast to build and ready for a fence on top.
Every wall we build has properly set posts or footings for its height and soil, ag-pipe drainage at the base wrapped in sock or geofabric, clean gravel backfill so water can reach the pipe, and an outlet that goes somewhere legal. Walls over 1 metre — or close to a boundary, building or driveway — are built to an engineer's design.
We bring samples to every Beveridge measure so you can see them against your house.
Galvanised steel posts with reinforced concrete sleepers. Fast, tidy and long-lasting — $350–$600 per m² of wall face.
Besser block walls, steel-reinforced and core-filled with concrete. Ideal for taller or engineered walls — $500–$850 per m².
Formed and poured in place for maximum strength — basements, cut-ins and commercial sites. $650–$1,100 per m².
Natural sandstone blocks for gardens and feature landscaping — $550–$950 per m².
Treated pine or hardwood for low garden beds on a budget — $250–$450 per m².
Rock-filled steel baskets — free-draining and modern-looking. $450–$800 per m².
| Job | Indicative price (inc. GST) |
|---|---|
| Concrete sleeper wall | $350–$600 per m² |
| Timber sleeper wall | $250–$450 per m² |
| Core-filled block wall | $500–$850 per m² |
| Sandstone wall | $550–$950 per m² |
| Gabion wall | $450–$800 per m² |
| Poured concrete wall | $650–$1,100 per m² |
Indicative 2026 Melbourne ranges for standard access. Your price depends on size, access, excavation, slope and finish — you get a fixed written quote after a free on-site measure.
Free on-site visit. We check levels, access, soil and drainage, then give you a fixed written price.
Excavation, compacted crushed-rock base, formwork, steel reo and vapour barrier — the bit you never see.
Australian premix pumped or barrowed in, screeded to falls, then finished — broom, trowel, coloured or exposed.
Control joints saw-cut, surface sealed, site cleaned up. You get care instructions and a slab that lasts.
Indicatively $350–$600 per m² of wall face for a typical Beveridge job, depending on size, access, slope and finish. You'll get a fixed written price after a free on-site measure.
We can usually measure in Beveridge within 48 hours. Most retaining walls jobs are on site within one to three weeks of saying yes, weather permitting.
Beveridge is in Mitchell Shire Council. In Beveridge, as across Victoria, a retaining wall over 1 metre generally needs a building permit and engineering, and lower walls can too if they're near a boundary, building or easement. Drainage has to go to a legal point of discharge — Mitchell Shire Council can confirm yours.
Generally a retaining wall over 1 metre high needs a building permit and an engineer's design. Lower walls can also need one if they're near a boundary, building, driveway or easement, or hold up a load like a driveway. We'll tell you at the measure and can organise the engineering.
Timber sleepers are the cheapest up front, but concrete sleepers with steel posts usually work out better value because they don't rot. For most new-estate boundary walls, concrete sleeper is the sweet spot.
Tell us a little about the job and we'll book a free on-site measure — usually within 48 hours.
No obligation · On-site measure within 48 hours · Fixed written price
★★★★★ 5.0 on Google · Quality Australian materials